Teflon hose

1.oil-resistant
2.acid-alkali resistant
3.high&low-temprature resistant
4.light, flexible and convenien

Applications: It is manufactured according to the requirement specified by the European Standards EN 13765:2003 Type 3 (BS 5842:1980).Extremely flexible, easy to handle and bend.KangHong Loading hoses are used in rail and road tanker, loading and unloading; storage tank and in-plant use. Specifically engineered to handle oils, petrol, diesel, lubricating oils, paraffin. All hoses are 100% aromatic resistant, antistatic and can be used for suction or discharge. Vacuum rating is 0,9 bar, according to the EN ISO 7233 method B.

Safet: The hose assemblies are tested at 1 ½ times rated working pressures for safety and reliability, in accordance with BS 5842:1980 clause 6.4(EN ISO 1402). Full test certification can be supplied on request.The working pressure is based on a safety factor of 4:1

Electrical continuity is achieved by the two wires bonded to the end fittings, this helps dissipate accumulated charge and to avoid static flash. The electric resistance of hose assemblies is less than 10 ohms,as required by BS 5842:1980 clause 6.2 (EN ISO 8031) ,with a special outer antistatic black cover.

 

MODLE	SIZE			Maximun W.P		Min Burst (ENISO 1402)		Bend Radius		Weight
	mm		Inch	Bar	PSI	Bar	PSI	mm	Inch	KG/mt	Lb/Ft
OGGP-010L	25		1	10	150	40	600	100	4	0.9	0.6
OGGP-015L	38		1 ½	10	150	40	600	110	4.4	1.5	1
OGGP-020L	50		2	10	150	40	600	125	5	1.8	1.2
OGGP-025L	65		2.5	10	150	40	600	150	6	2.3	1.5
OGGP-030L	75		3	10	150	40	600	200	8	2.5	1.7